LG WD-1457RD - Inlet Valve; Door; When Reconnecting the Connector; Removing Method of Remained Water

VALVE ① (STEAM) VIOLET/BLACK-BLACK
VALVE ② (PRE-WASH) WHITE/BLACK-BLACK
VALVE
③
(NORMAL-WASH) GRAY/BLACK
VALVE
④
(HOT) BLACK/WHITE
VALVE
⑤
(
MAIN WASH
) GRAY/BLACK
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
󳢮When reconnecting the connector
31
INLET VALVE
4
1
2
5
3
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
CAP (REMAINING HOSE)
DOOR
Removing method of remained water