22
Yellow
Red
Replace the PWB assy
(Power)
Normal
Replace the heater assy
Replace the thermistor
(6322FR2046B)
Get the thermistor back
to the rubber.
When checking the voltage between two
receptacles of the PWB assy(Power) during
washing.
Is the voltage AC 220-240V?
After power off, is the resistance between yellow
wire and red wire of
connector 10 to 30¥ ?
After power off, is the resistance of heater
10 to 30¥ ?
Is the resistance between two receptacles with
BL/WH wires parted from PWB assy
2.5
k¥
to 180
k¥
(105
¡
~0
¡
)?
When checking thermistor on the tub cover,
is the thermistor gotten more than 2 mm out of the
rubber?
WASH HEATER TROUBLE
HEATING WATER CONTINUOUSLY ABOVE
THE SELECTED WATER TEMPERATURE
To Next Page
Loading...