How to select temp.
■ Use it to select hot or cold water
(When hot water only is selected, hot
water is supplied for washing and cold
water are supplied for rinsing).
■ In WOOL program, cold water is
selected automatically.
(Hot water may damage the fabric).
Child lock function
■ Use to lock or unlock the control buttons
to prevent all the setting being change
by a child.
■ For locking, push both buttons
(PROCESS+PROGRAM)
simultaneously and for unlocking, push
them one more in washing process
How to use Process
■ Use to select the desired function among soak,wash,rinse and spin.
■ By pression the button,it cycle
[WASH+RINCE+SPIN] � [RINSE+SPIN] � [RINSE] �
[WASH+RINSE]�[WASH]�
[TURBO(SOAK)+WASH+RINSE+SPIN] �
[TURBO(SOAK)+WASH+RINSE ] � [TURBO(SOAK)+WASH].
How to adjust the water level
■ By pressing the button, it cycles
[LARGE � EX-LARGE � SMALL� MEDIUM�LARGE]
■ At FUZZY program, water level is selected automatically based on the
amount of laundry.
■ Water level is set to LARGE for WOOL program, EX-LARGE for
BLANKET PROGRAM.
■ Water level can be adjusted even when the washer is in operation.
▶ Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation (Except for water level, water temp).
Note
* The control panel may differ according to different models
To Next Page
Loading...
Need help?
General
