2. INSTALLATION INSTRUCTIONS
2-1. HOW TO ADJUST LEVEL
4
How to use the adjusting plates
∙
Use the adjusting plates to level the washer when the
adjustable legs cannot cover the gap.
Adjustable leg
Turn the adjustable legs to set the washer
horizontal (2 EA).
Installation area
∙Install the washer on flat and firm
surface.
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed be carpeting
when the washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be
less than 1
��
.
Checking level
∙Open the lid, and check if the washer is
correctly leveled by looking down from
the top.
To Next Page
Loading...
Need help?
General
