LG WF-95T User Manual

23
Close the lid Finish Caution & Note
The pulsator rotates for 8 seconds
to detect the laundry load.
Then the water level and the
amount of detergent to be used
will be shown and water will be
supplied.
Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.
When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low.
Changes to water temperature (hot/cold)
and wash level are possible during
operation.
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
3
5
6
7
8
7
7
6
6
6
7
4
4
5
4
When setting the water level manually,
do not set to MEDIUM to prevent
damage to laundry.
Washing with hot water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
Turbo(Soak)/ Wash cannot be selected
for the Wool Wash program.
t
e
nt as
ater
ER-
gent
gent
d

LG WF-95T Specifications

General

Brand	LG
Model	WF-95T
Category	Washer
Language	English