Why is water leaking around my LG WM2140CW Washer?
If you notice water leaking around your LG Washer, first check the fill hose connections at both the tap and the washer to ensure they are tight. If the leak persists, the house drain pipes may be clogged. Try unclogging the drain pipe yourself, or contact a plumber for assistance if needed.
What to do if my LG WM2140CW will not turn on?
If your LG Washer won't turn on, ensure the power cord is properly plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker. Reset the circuit breaker or replace the fuse if necessary, without increasing its capacity. If a circuit overload is the cause, have it corrected by a qualified electrician.
Why won’t my LG WM2140CW spin?
If your LG Washer won't spin, make sure the door is closed properly and press the START/PAUSE button. It may take a few moments for the drum to begin to turn or spin after starting a cycle. The washer will not spin unless the door is locked (DOOR LOCK will appear in the display).
What to do if the door will not unlock on my LG WM2140CW?
If the door of your LG Washer will not unlock after stopping or pausing a cycle, it may be due to a safety lock to prevent burns. Allow the washer to cool until the DOOR LOCK indicator turns off in the display. Alternatively, allow the washer to complete the programmed cycle, or run the DRAIN & SPIN cycle to drain the water.
Why won't my LG Washer turn on?
If your LG Washer won’t turn on, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check if a house fuse is blown, or the circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse, but do not increase the fuse capacity. If a circuit overload is the issue, have it corrected by a qualified electrician.
Why won't my LG Washer spin?
If your LG Washer won’t spin, it might be because the door isn't closed properly. Make sure the door is fully closed and then press the START/PAUSE button. It may take a moment for the drum to start spinning after the cycle begins. The washer won't spin unless the door is locked, and 'DOOR LOCK' will appear on the display. If the door is closed and locked, but the open door error message persists, you should call for service.
How to fix slow draining water in my LG WM2140CW Washer?
If water drains slowly or not at all from your LG Washer, or if the display shows an error, check the drain hose for bends, pinches, or clogs, ensuring it's not obstructed behind or under the washer. Also, inspect and clean the drain filter.
Why does my LG WM2140CW Washer fill with water slowly?
If your LG Washer fills with water slowly or not at all, first ensure that the water supply taps are fully open and that the water line hoses are not kinked or pinched. Be careful when moving the washer. Also, clean the inlet filters. Check another faucet in the house to ensure adequate household water pressure.
What to do if my LG Washer displays an error due to imbalanced load?
If your LG Washer display shows an error, try adding 1 or 2 similar items to help balance the load. If that doesn't work, rearrange the items to achieve better balance.
What to do if the door will not unlock on my LG Washer after pausing?
If the LG Washer door will not unlock after stopping or pausing a cycle, it may be due to a safety lock that prevents burns if the interior temperature is too high. Allow the washer to cool down until the DOOR LOCK indicator turns off. Alternatively, the water level might be too high. In this case, let the washer complete the cycle or run the DRAIN & SPIN cycle to remove the water.
General| Type | Front Load Washer |
|---|---|
| Energy Star | Yes |
| Color | White |
| Control Type | Electronic |
| Steam Washer | No |
| Dimensions | 27" x 38 11/16" x 29 3/4" |
| Spin Speed | 1200 RPM |
To Next Page
