17
INSTALLATION
ENGLISH
Test run
Check if the washing machine is properly installed and run a
test cycle.
1
Load the washing machine with 6 pounds of laundry.
2
Press
A
3
Press to select RINSE+SPIN option.
4
Press
C
.
- The wash cycle starts.
5
Check if water is supplied, that the washing machine
does not rock or vibrate excessively, and that it drains
well during the spin cycle.
- If water leaks during water supply, see page 13,
Connecting the water lines
to connect them properly.
- If the washing machine rocks and vibrates excessively,
see page 15,
Leveling the washing machine
to level it
again.
- If the drain does not work, see page 13,
Connecting the
drain line
to install it properly.
To Next Page
Loading...
