PRODUCT PARTS LIST
DISASSEMBLY/REPAIR (Front Cabinet Cover, continued)
8. Open the door.
9. Remove the clamp using
special tool 383EER4001A.
10. Lean the cabinet front forward,
being careful to avoid breaking
the glass. The door is HEAVY.
11. Disconnect the door switch
connector. (Remember to
replace it upon reassembly.)
12. Lift the door and front cover off
the cabinet base as an
assembly. Lay it face down on
a blanket or some other
protective surface.
MODEL PRODUCT Page 43 of 64 TRAINING MANUAL
To Next Page
Loading...
