EasyManua.ls Logo

LG WP600 - False Color Mode S N, E9; Hdr Eotf; Waveform On;Off S N, E8

LG WP600
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
119
ENGLISH
115. Waveform On/Off (Command: s n, e8)
Controls the on/off function of the Waveform.
Transmission
(s)(n)( )(Set ID)( )(e)(8)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(8)(Data)(x)
* It may not be supported depending on the model.
116. False Color Mode (Command: s n, e9)
Sets the False Color mode.
Transmission
(s)(n)( )(Set ID)( )(e)(9)( )(Data)(Cr)
Data 00: Off
01: Turn on the Zebra pattern
02: Turn on the Color pattern
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(9)(Data)(x)
* It may not be supported depending on the model.
117. False Color Zebra (Command: s n, ea)
Sets the Zebra pattern value for the False Color.
Transmission
(s)(n)( )(Set ID)( )(e)(a)( )(Data)(Cr)
Data 00~64: Zebra pattern 0~100
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(a)(Data)(x)
* It may not be supported depending on the model.
118. False Color Color (Command: s n, eb)
Sets the Color pattern value for the False Color.
Transmission
(s)(n)( )(Set ID)( )(e)(b)( )(Data)(Cr)
Data 00~64: Color pattern 0~100
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(b)(Data)(x)
* It may not be supported depending on the model.
119. SDR/HDR Signal Format (Command: s n, ec)
Sets the SDR/HDR Signal Format.
Transmission
(s)(n)( )(Set ID)( )(e)(c)( )(Data)(Cr)
Data 00: Auto
01: SDR
02: HDR
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(c)(Data)(x)
* It may not be supported depending on the model.
120. HDR EOTF (Command: s n, ed)
Sets the HDR EOTF value.
Transmission
(s)(n)( )(Set ID)( )(e)(d)( )(Data)(Cr)
Data 00: Auto
01: PQ100
02: PQ200
03: PQ300
04: PQ400
05: PQ500
06: PQ600
07: PQ700
08: PQ800
09: PQ900
0A: PQ1000
0B: PQ2000
0C: PQ4000
0D: PQ10000
0E: HLG
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(d)(Data)(x)
* It may not be supported depending on the model.
121. Phase Shift (Command: s n, ee)
Sets the phase shift value.
Transmission
(s)(n)( )(Set ID)( )(e)(e)( )(Data)(Cr)
Data 0000~0168: Shift value 0~360
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(e)(e)(Data)(x)
* It may not be supported depending on the model.

Table of Contents

Related product manuals