Note
F
unction of each Button
* For optimizing the washing algorithm, the displaying time may be changed.
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically after the wash is
finished.
• After turning the power on, if you don’t push any
button the power goes off automatically.
POWER BUTTON
• Use to set a delayed finishing time.
• The time increases when the button is pushed.
•
The following settings are indicated as the button is pushed 1
2 3 4 ... 12 14 16 18 ... 24 HOUR
Reservation off 1 ...
•
To cancel delay time, turn the power switch off or push DELAY
WASH button until Reservation off. (refer to page 18)
• It operates in all program.
• During being detected by the sensor, the ‘LOAD SENSING’
LED flashes.
• It automatically sensing the quantity of laundries.
• During this step,the washing machine select optimized
washing algorithm.
LOAD SENSING
• This button allows you to select
the strength of the wash action.
• Power option selections light up
in sequence as follows Normal
Heavy Light Normal as the
button is pushed.
This can be selected for any
program.
• Adjustment can be made while
washing.
•
Default SOIL LEVEL is Normal.
SOIL LEVEL BUTTON
• This button
allows you to
store a
customized wash
cycle for future
use .
(refer to page 21)
Custom Program
BUTTON
• It gives additional Soak.
• The following settings are indicated as the
button is pushed 15 30 45 60
120 180min. Soak off 15
(refer to page 19)
SOAK BUTTON
• It gives additional rinse cycle.
(For better rinsing effect)
(refer to page 20)
EXTRA RINSE BUTTON
DELAY WASH (Reservation)
BUTTON
Before Starting to Wash
14
To Next Page
Loading...
