15
Before Starting to Wash
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
• Beeper alerts you that the cycle is complete.
The clothes should be removed when the
beeper goes off so wrinkles won't set on.
• Beeper selection light up in sequence as
follows: Low High Off Low
•Touch "Beeper" to select the volume or to turn
the beeper off.
BEEPER BUTTON
• Use to select Water (Wash
/Rinse) Temperature.
• Pressing the button allows
you to select Cold/Cold
Warm/Cold Hot/Cold
respectively.
Default setting is
Warm/Cold.
WASH / RINSE
BUTTON
• Use to lock or unlock the control
buttons to prevent settings from being
changed by a child.
•To lock, push the SOIL LEVEL and
WASH / RINSE buttons
simultaneously during the wash mode
and to unlock push them one more
time during the washing process.
(refer to page 23)
CHILD LOCK FUNCTION
• Use to start or pause the wash cycle.
Changes can be made to the wash
settings whilst the machine is paused.
• Repeats start and pause by pushing the
button.
START/ PAUSE BUTTON
• Use for selecting wash
program.
• This button allows you to
select 6 different programs
for different kinds of
laundry and dirtiness.
• Program selections light up
in sequence as follows:
Fuzzy Heavy Duty
Eco Cotton Wool/Silk
Speed Wash Rinse/Spin
Fuzzy etc.
Select the desired program
by pressing the button.
CYCLE BUTTON
• Spin speed can be
selected from No Spin
to Extra high.
Default is “Low”.
(refer to page 22)
SPIN SPEED
To Next Page
Loading...
