To Next PageTo Next PageWhat to do if LG WT19WSBP Washer will not drain water?
If your LG washer will not drain water, ensure that the drain hose is not kinked. Also, make sure that the drain hose is no higher than 1.2 m above the bottom of the washing machine.
Why is my LG Washer not filling properly?
If your LG washer isn't filling properly, make sure the inlet filters on the fill valves are not clogged. Check that supply hoses are not kinked or clogged. Ensure that both hot and cold water taps are turned on all the way. Verify supply hose connections, because hot and cold supply hoses may be reversed.
What to do if my LG WT19WSBP is leaking water?
If your LG washer is leaking water, check the supply hose connections at both the tap and the washing machine to ensure they are tight and the hoses aren't cracked or split. Also, inspect the house drain pipes for clogs, especially if water is backing up during the drain cycle; a plumber may be needed to repair clogged drain pipes. Make sure the drain hose is properly installed and secured to prevent it from coming out during draining. Finally, ensure that large items like pillows or blankets aren't above the top of the drum, as this can also cause leaks.
Safety guidelines for appliance installation, electrical connections, and grounding.
Safety rules for operating, cleaning, maintaining, and servicing the appliance.
Precautions against fire, physical injury, and safe disposal methods.
Requirements for installation location, unpacking procedures, and site preparation.
Steps for making electrical and water connections, installing the drain hose, and levelling the appliance.
General
