21
Pump fixing screw
Leads
Drain Hose-p
4) Disassembly of Back Cover, Drain
Pump.
① Remove back cover screws, then disassemble the
back cover.
② Disconnect the leads and the drain hose-p from the
drain pump.
③ Remove the pump fixing screws and the connector
hose disassemble the drain pump.
5) Replacement of Damper asm
① Separate top cover from washing machine.
② As in the fig, lift snubber bar and take it out of out
case with out tub.
③ Damper assembly shall not be disassembled.
Replace damper as assembly.
To Next Page
Loading...
