To Next PageTo Next PageWhy is there no water supply to my LG Washer?
If there is no water supply, first ensure the water faucet is open and wait until the water supply is resumed. If that's not the issue, the inlet valve might be clogged with dirt, so clean or replace the filter. Correct the connector contact. The RED 6-pin connector may have a bad connection at the main board, so correct the connector contact.
What to do if my LG WT4801CW is not draining?
If your LG Washer is not draining, ensure the drain hose is properly positioned at 0.9 ~ 1.2 m (36 ~ 48 inches) above the floor. Make sure the drain hose is not plugged with a foreign object. Check drain pump motor contact and replace the pump if necessary.
General| Electrical | 120VAC@60Hz |
|---|---|
| Rating of Fuse | 125V, 12A for 100~127V/60Hz |
| Auto Power Off | Yes |
| Inner Tub | Stainless |
| Softener Dispenser | Yes |
| Detergent Dispenser | Yes |
| Bleach Inlet | Yes |
| Inlet Water Pressure | 14.5 ~ 116 PSI (100 ~ 800 kPa) |
| Time Delay | 1-24 Hr |
| Spin Speed | Max. spin speed 1, 000 |
| Cycles | Cotton/Normal, Heavy Duty, Bulky/Bedding, Tub Clean, Perm Press Casual, Delicates, Speed Wash, Rinse+Spin |
| Smart Rinse™with Jet Spray | Yes |
| Lid Interlock Switch | Magnet Sensor |
| Child Lock | Yes |
Weight and Dimensions| Weight | 145.5 lbs (58kg) |
|---|
Describes the direct-drive motor's benefits like reduced energy loss, noise, and vibration.
Allows data transmission for diagnosis by a call center agent for quick issue analysis.
Regular monthly cleaning of the tub to keep it clean and fresh.
Disables controls during a wash cycle to prevent children from changing settings or operating.
Saves rinse water using jet spray in specific cycles.
Highlights the durability of the stainless steel drum.
General warnings about fire, electric shock, property damage, injury, or death, with safety alert symbols.
Explains the meaning of DANGER, WARNING, and CAUTION symbols for hazard communication.
Lists precautions for use, including installation, flammable substances, children, weather, and controls.
Details the importance of grounding for safety and proper installation of the appliance.
Emphasizes proper grounding, outlet use, and avoiding modifications for electrical safety.
Covers floor requirements, temperature, humidity, and safe handling during installation.
Advises on unplugging for cleaning, avoiding harsh chemicals, flammable substances, and mixing products.
Focuses on preventing children from playing with the washer and proper disposal of packaging.
Identifies and illustrates the main parts of the washing machine for user familiarization.
Lists accessories that come with the washer and those required for operation.
Explains the function of each button on the control panel, including Power, Cycle Selector, and Start/Pause.
Describes the LED display and how to use option buttons for cycle customization.
Shows the estimated time left in the wash cycle, calculated based on load and settings.
Indicates the current stage of the wash cycle (LOAD SENSING, WASH, RINSE, or SPIN).
Provides a visual overview of installation steps and critical safety warnings for installation.
Details requirements for a solid floor and necessary space around the washer for ventilation and connections.
Outlines the process of removing packaging and lists necessary tools for unpacking.
Details how to connect water hoses to faucets and washer, including warnings about overtightening.
Provides specifications for water pressure and recommended temperature for optimal performance.
Explains how to secure the drain hose using a standpipe or a laundry tub.
Guides users on adjusting the leveling feet to ensure the washer is stable and operates correctly.
Describes how to check for stability and warns against operating an unlevelled machine.
Details how to plug in the power cord, emphasizing grounding and safety precautions.
Explains how to perform a test run to ensure proper installation and operation.
Guidance on sorting laundry loads to prevent shrinkage, damage, and ensure proper cleaning.
Advises on checking pockets, zippers, drawstrings, and pretreating stains before washing.
Explains the meaning of various fabric care labels related to washing, temperature, and bleach.
Recommends sorting laundry by color, soil level, fabric type, and lint properties for optimal washing.
Advises using HE detergents and the correct amount to prevent excessive suds and buildup.
Details how to load detergent into the dispenser's main wash compartment.
Explains the function and usage of the main wash, liquid bleach, and fabric softener compartments.
Provides a step-by-step guide for basic operation, from loading to starting the wash cycle.
Details recommended fabric types, wash temps, soil levels, and spin speeds for each wash cycle.
Describes various main wash cycles like Cotton/Normal, Heavy Duty, Bulky/Bedding, and Delicates.
Explains how to use cycle setting buttons to customize wash parameters like temperature, soil level, and spin speed.
Guides on selecting wash temperature, soil level, and spin speed before starting a cycle.
Details how to adjust soil level for thorough washing and spin speed for efficient drying.
Explains how to adjust or turn off the end-of-cycle melody and button tones.
Covers adding garments mid-cycle and setting a delayed start time for the wash.
Explains how to use fabric softener and the SOAK option for enhanced cleaning.
Details how to add an extra rinse cycle or create a custom wash program.
Describes how to enable and disable the child lock to prevent unintended cycle changes.
Instructions on cleaning inlet filters to ensure proper water flow and prevent error messages.
Provides guidance on preventing damage from freezing water lines and drain lines.
Explains how to use the TUB CLEAN cycle to remove mold, germs, and odors from the drum.
Details how to remove and clean the detergent dispenser drawer and its inserts.
Lists common error codes, their causes, and corrective actions for washer malfunctions.
Details additional error codes like UE, LE, PE, OE and their troubleshooting steps.
Describes sounds like clicking, humming, and sloshing that are normal during operation.
Provides guidance on troubleshooting common problems like rattling, thumping, leaks, and excessive suds before contacting support.
Addresses issues such as the washer not operating, not filling, or filling slowly, and their solutions.
Covers problems related to draining, water leaks, and unusually long wash cycle times.
Explains issues with detergent or bleach dispensing, such as incomplete dispensing or clogging.
Provides solutions for poor stain removal and how to prevent wrinkling in clothes.
Lists the model number, electrical requirements, dimensions, weight, and spin speed.
Instructions on how to use the Smart Diagnosis feature to troubleshoot the washer via phone.
Details the warranty period, scope of coverage, and common exclusions for the washing machine.
Provides contact information and instructions for obtaining warranty service and additional information.
Outlines the warranty period, scope, and exclusions specific to Canada.
Provides contact details and instructions for warranty service in Canada.
