To Next PageTo Next PageWhy does my LG WT6105C say UNBALANCE ERROR?
The LG Washer displays an UNBALANCE ERROR because the load is too small, heavy items are mixed with lighter ones, or the load is simply out of balance. To resolve this, add more items to balance the load, wash similar weight items together, or manually redistribute tangled items in the drum.
Why does my LG WT6105C say UE?
The UE error on your LG washer indicates an unbalance error. This can occur if the load is too small, so add additional items to help balance it. It can also happen when heavy items are mixed with lighter ones; try washing items of similar weight. If the load is severely out of balance, manually redistribute the items in the drum.
What to do if my LG WT6105C displays IE error?
The IE error on your LG washer means there's an inlet error. First, check that the water supply faucets are fully open. Also, inspect the water inlet hoses for any kinks, pinches, or crushing, especially behind the washer. Using leak-limiting hoses can also cause this issue, so their use is not recommended. Ensure the end of the drain hose is higher than 29.5 inches above the washer's bottom.
What to do if my LG Washer shows INLET ERROR?
If your LG Washer displays an INLET ERROR, it could be due to several reasons: * The water supply faucets are not fully open: Ensure they are fully open. * The water inlet hoses are kinked, pinched, or crushed: Check and correct the hose positions. * Water inlet filters are clogged: Clean the inlet filters (refer to the MAINTENANCE section). * Low water supply pressure: Check other faucets and flush the hoses. Contact a plumber if needed. * Leak-limiting hoses are connected: These are not recommended as they can falsely trip and prevent filling.
What to do if my LG WT6105C shows WATER OUTLET ERROR?
If your LG Washer is displaying a WATER OUTLET ERROR, check the following: * Ensure the drain hose is free of clogs or kinks and is not pinched behind or under the washer. * Make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; adjust its position if necessary.
What to do if LG WT6105C displays dE error?
The dE error on your LG washer indicates a lid error. Make sure the lid is properly closed.
How to turn off CL on LG WT6105C?
The CL error on your LG washer means the control lock function is activated, preventing changes to cycles or operation. Turn off the control lock function in the control panel.
What does LE1 mean on my LG WT6105C Washer?
The LE1 error on your LG washer indicates a foreign object error. Foreign objects like coins or clips may be caught between the pulsator and the inner tub. Turn the washer off and then on again. Press the Spin button to drain the load. After the spin cycle, empty the tub and remove any foreign objects. Always check pockets before washing.
What does FE mean on LG WT6105C Washer?
The FE error on your LG washer means that there is an overflow error because the water level is too high.
What does LE mean on LG WT6105C?
The LE error on your LG washer indicates a motor error. Allow the washer to stand for 30 minutes, then restart the cycle.
Emphasizes reading all safety messages and understanding warnings and cautions.
Details precautions for installation to prevent explosion, fire, shock, scalding, or injury.
Provides safety guidelines for operating the washing machine, including intended use and handling hazards.
Outlines safety precautions for cleaning and servicing the appliance, emphasizing qualified personnel.
Explains the importance of proper grounding for electrical safety and preventing shock.
Advises installing the product on a firm and level floor to prevent minor injury or damage.
Lists precautions for operation, such as not placing objects on top and following fabric care instructions.
Covers crucial safety warnings and preparation steps before installing the appliance.
General
