Why does my LG WT6105CW Washer say UNBALANCE ERROR?
The LG Washer displays an UNBALANCE ERROR because the load is too small, heavy items are mixed with lighter ones, or the load is simply out of balance. To resolve this, add more items to balance the load, wash similar weight items together, or manually redistribute tangled items in the drum.
What to do if my LG WT6105CW shows INLET ERROR?
If your LG Washer displays an INLET ERROR, it could be due to several reasons: * The water supply faucets are not fully open: Ensure they are fully open. * The water inlet hoses are kinked, pinched, or crushed: Check and correct the hose positions. * Water inlet filters are clogged: Clean the inlet filters (refer to the MAINTENANCE section). * Low water supply pressure: Check other faucets and flush the hoses. Contact a plumber if needed. * Leak-limiting hoses are connected: These are not recommended as they can falsely trip and prevent filling.
What to do if my LG WT6105CW shows WATER OUTLET ERROR?
If your LG Washer is displaying a WATER OUTLET ERROR, check the following: * Ensure the drain hose is free of clogs or kinks and is not pinched behind or under the washer. * Make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; adjust its position if necessary.
Explains safety symbols (Warning, Caution) and their meanings.
Covers safety during installation, operation, and maintenance tasks.
Step-by-step guide for connecting all necessary utilities.
Resolving issues based on error indicators and codes.
Troubleshooting noises, leaks, suds, staining, and other common problems.
General| Type | Top Load Washer |
|---|---|
| Energy Star Certified | Yes |
| Number of Wash Programs | 8 |
| Color | White |
| Steam | No |
| Smart Washer | No |
| Number of Wash Cycles | 8 |
| Control Type | Electronic |
| Delay Wash | Yes |
| Child Lock | Yes |
| Water Level Settings | Auto |
To Next Page
