34 MAINTENANCE
4 Immerse the water inlet hoses in hot water to
thaw them.
5 Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
•See Connecting the Water Inlet Hoses for
details.
6 Turn on the faucets.
7 Press the Power button to turn on the
washer.
8 Select the Spin Only cycle. There will be a
brief rinse before the tub drains and spins.
9 Press the Start/Pause button and check that
the water fills properly.
When the Drain Hose is Frozen
1 Pour hot water in the washer tub and close
the lid.
2 Wait for 1 - 2 hours.
3 Press the Power button to turn on the
washer.
4 Select the Spin Only cycle to drain and spin
the tub.
5 Press the Start/Pause button to make sure
the water drains.
To Next Page
Loading...
