43TROUBLESHOOTING
ENGLISH
Poor stain removal Proper options are not selected.
• Heavier soils and tougher stains may require extra cleaning power. Select the Soak or
Stain Care feature to boost the cleaning power of the selected cycle.
Previously set stains.
• Articles that have previously been washed may have stains that have been set. These
stains may be difficult to remove and may require hand washing or pre-treating to aid in
stain removal.
Musty or mildewy
odor in the washer
Incorrect or too much detergent has been used.
• Use only HE (High-Efficiency) detergent in accordance with the manufacturer’s
instructions.
Inside of the tub was not cleaned properly.
• Run the Tub Clean cycle regularly.
Problem Possible Cause & Solution
To Next Page
Loading...
Need help?
General
