To Next PageTo Next PageWhy does my LG Washer show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
What to do if my LG WT7060C shows an IE INLET ERROR?
The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
Why does my LG WT7060C show an IE Inlet Error?
The IE Inlet Error on your LG Washer can occur for several reasons. First, ensure that your water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed. Insufficient household water pressure or the use of leak-limiting hoses can also cause this error. Also, make sure that the end of the drain hose is higher than 29.5 inches (75 cm) above the bottom of the washer. If the issue persists, the water inlet filters may be clogged and need cleaning.
How to fix the UE UNBALANCE ERROR on my LG Washer?
The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
How to fix OE WATER OUTLET ERROR on LG WT7060C?
The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
What to do if my LG WT7060C Washer displays the OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG Washer indicates a drainage issue. This can be due to a kinked, pinched, or clogged drain hose; ensure the hose is free of obstructions. Also, verify that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the hose.
What to do if my LG Washer is making a rattling and clanking noise?
If your LG Washer is making rattling and clanking noises, it might be due to foreign objects like keys, coins, or safety pins in the tub or pump. To resolve this, stop the washer and inspect both the tub and drain filter for any such items. If the noise persists after restarting the washer, it is recommended to call for service.
Covers general safety alerts, warning/caution definitions, and specific warnings.
Safety precautions for installing, operating, and maintaining the appliance.
Precautions to reduce risk of minor injury, malfunction, or property damage.
Safety, location selection, tools, power outlet, and flooring requirements.
Instructions for unpacking, connecting water/drain hoses, and leveling the washer.
Common error codes, their causes, and solutions.
General
