What does LE1 FOREIGN OBJECT ERROR mean on LG WT7005C?
The LE1 FOREIGN OBJECT ERROR on your LG washer indicates that foreign objects, such as coins, pins, or clips, are caught between the pulsator and the inner tub. To resolve this, turn the washer off and then on again. Press the Spin button without selecting a cycle to drain and spin the load. Once completed, empty the tub and remove any objects caught in the pulsator.
What to do if my LG WT7005C Washer shows IE INLET ERROR?
If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
Why does my LG WT7005C Washer show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
What does Ps mean on LG Washer?
The Ps error on your LG washer indicates that the supply voltage is not correct.
What does tE TEMPERATURE SENSOR ERROR mean on LG WT7005C Washer?
The tE TEMPERATURE SENSOR ERROR on your LG washer indicates a control error. Unplug the washer and wait 60 minutes, then reconnect the power and try again. If the error persists, further assistance may be required.
What does LE mean on LG Washer?
The LE error on your LG washer indicates a motor error. Allow the washer to stand for 30 minutes, then restart the cycle.
Why does my LG WT7005C have OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG washer means there's an issue with the water outlet. Ensure the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Additionally, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, adjust it to be lower.
How to fix LG WT7005C that is not filling properly?
If your LG washer isn't filling properly, check that the inlet filters on the fill valves are not clogged and that the inlet hoses are not kinked. Ensure both hot and cold water faucets are fully turned on. Close the lid completely, making sure nothing obstructs it. Note that as a High-Efficiency (HE) washer, the water level may not cover the clothes entirely, as the fill level is optimized for wash performance.
What does tE mean on LG Washer?
The tE error on your LG washer indicates a temperature sensor error, which is a control error. Unplug the washer and wait 60 minutes before reconnecting the power and trying again.
Why does my LG WT7005C have IE INLET ERROR?
The IE INLET ERROR on your LG washer indicates a water inlet issue. Ensure that the water supply faucets are fully open and that the water inlet hoses are not kinked, pinched, or crushed. If the water inlet filters are clogged, clean them. Check that household water pressure is adequate. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
Safety messages and their meanings (WARNING, CAUTION).
Precautions for installation and operation to avoid hazards.
Specific caution for installing the product on a firm, level floor.
Cautions regarding appliance use, such as turning off faucets and fabric care.
Warnings and precautions before starting the installation process.
Importance and procedure for leveling the washing machine.
Read safety instructions before operating the appliance.
Guidance on using HE detergents and other cleaning products.
General advice on checking common issues before contacting support.
Table listing error codes and their possible causes and solutions.
Table of common noises and their possible causes and solutions.
Common operational problems and their solutions.
Common performance issues like wrinkling and staining, and their causes.
To Next Page
General
