LG WT7005C Series - User Manual

LG WT7005C Series

52 pages

To Next Page

To Next Page

Loading...

OWNER'S MANUAL

WASHING MACHINE

Read this owner's manual thoroughly before operating the

appliance and keep it handy for reference at all times.

ENGLISH

WT7005C* / WT7155C*

MFL68267091

Rev.01_011122

www.lg.com

Copyright © 2020-2022 LG Electronics Inc. All Rights Reserved.

Questions and Answers:

A
Anthony BauerAug 25, 2025
What to do if my LG WT7005C Washer shows IE INLET ERROR?
- J
  Joseph CopelandAug 25, 2025
  If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
S
Stephanie TaylorAug 25, 2025
Why does my LG WT7005C Washer show a UE UNBALANCE ERROR?
- C
  cruzjacobAug 26, 2025
  The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
K
Kelli SmithAug 26, 2025
What to do if my LG WT7005C shows an IE INLET ERROR?
- J
  Jennifer JonesAug 26, 2025
  The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
D
David MathewsAug 27, 2025
Why does my LG Washer show an IE Inlet Error?
- J
  Jasmine SullivanAug 27, 2025
  The IE Inlet Error on your LG Washer can occur for several reasons. First, ensure that your water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed. Insufficient household water pressure or the use of leak-limiting hoses can also cause this error. Also, make sure that the end of the drain hose is higher than 29.5 inches (75 cm) above the bottom of the washer. If the issue persists, the water inlet filters may be clogged and need cleaning.
R
Richard Davis DVMAug 27, 2025
How to fix the UE UNBALANCE ERROR on my LG WT7005C Washer?
- D
  David KelleyAug 27, 2025
  The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
A
Alexandria HensleyAug 28, 2025
Why is my LG Washer not turning on?
- S
  Seth FloydAug 28, 2025
  If your LG washer isn't turning on, there could be a few reasons. First, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60 Hz outlet. Also, check your house fuse or circuit breaker. Reset the circuit breaker or replace the fuse, but do not increase the fuse capacity. If a circuit overload is the issue, consult a qualified electrician.
C
christopherturnerAug 29, 2025
Why does my LG Washer have a UE UNBALANCE ERROR?
- J
  Jesse HallAug 29, 2025
  The UE UNBALANCE ERROR on your LG washer typically means the load is unbalanced. This can happen if the load is too small, so try adding more items. It can also occur if heavy articles are mixed with lighter items; try to wash items of similar weight together. If the load is tangled, manually redistribute it to allow the washer to rebalance.
M
Michael WoodAug 30, 2025
What to do if LG Washer water does not drain?
- T
  teresawilliamsAug 30, 2025
  If the water in your LG washer isn't draining properly, start by checking the drain hose. Make sure it is free of clogs or kinks and is not pinched behind or under the washer. Also, ensure that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, lower it.
M
montoyacarolynAug 30, 2025
Why does my LG WT7005C have IE INLET ERROR?
- L
  Louis HowardAug 31, 2025
  The IE INLET ERROR on your LG washer indicates a water inlet issue. Ensure that the water supply faucets are fully open and that the water inlet hoses are not kinked, pinched, or crushed. If the water inlet filters are clogged, clean them. Check that household water pressure is adequate. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
W
willieriveraAug 23, 2025
Why does my LG WT7005C Washer show UE UNBALANCE ERROR?
- A
  Ashley CampbellAug 25, 2025
  The UE UNBALANCE ERROR on your LG washer can occur due to several reasons. It may appear if the load is too small; in this case, add additional items to balance the load. This error can also happen when heavy articles are mixed with lighter items; always try to wash items of similar weight to evenly distribute the load. Finally, the load might be out of balance because articles have become tangled. If this occurs, manually redistribute the load.

LG WT7005C Series Specifications

General

Brand	LG
Model	WT7005C Series
Category	Washer
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Safety messages and their meanings (WARNING, CAUTION).

WARNING STATEMENTS

Precautions for installation and operation to avoid hazards.

CAUTION STATEMENTS

Installation

Specific caution for installing the product on a firm, level floor.

Operation

Cautions regarding appliance use, such as turning off faucets and fabric care.

INSTALLATION

Before Installing

Warnings and precautions before starting the installation process.

Connecting the Water Inlet Hoses

Connecting the Drain Hose

Leveling the Washer

Importance and procedure for leveling the washing machine.

Final Installation Check

OPERATION

Before Use

Read safety instructions before operating the appliance.

Loading the Washer

Adding Cleaning Products

Guidance on using HE detergents and other cleaning products.

Using the Detergent and Softener Dispenser Drawer

Using the Liquid Bleach Dispenser

Control Panel

Control Panel Features

Cycle Modifier Buttons

Option and Extra Function Buttons

Cycle Modifiers

About Modifier Buttons

MAINTENANCE

Regular Cleaning

Cleaning the Tub

Cleaning the Dispenser Drawer

Removing Mineral Buildup

Cleaning the Water Inlet Filters

Care in Cold Climates

Storing the Washer

When the Drain Hose is Frozen

TROUBLESHOOTING

Before Calling for Service

General advice on checking common issues before contacting support.

Error Messages

Table listing error codes and their possible causes and solutions.

Noises

Table of common noises and their possible causes and solutions.

Operation

Common operational problems and their solutions.

Performance

Common performance issues like wrinkling and staining, and their causes.

Related product manuals

Preview: LG WT7000C Series

LG WT7000C Series

Preview: LG WT7010CW

Preview: LG WT7050CV

Preview: LG WT7060C Series

LG WT7060C Series

Preview: LG WT7010C Series

LG WT7010C Series

Preview: LG WT7150CW

Preview: LG WT7305CW

Preview: LG WT7400CW

Preview: LG WT7900HBA