Why is bleach not dispensing in my LG WT7005C?
If bleach is not dispensing in your LG washer, first ensure that the bleach dispenser cover is properly installed and snapped into place before starting the cycle. Also, check if the bleach dispenser is dirty or clogged. Lift out the bleach dispenser cover and clean out the reservoir to remove any lint or debris.
What does CL CONTROL LOCK FUNCTION mean on LG WT7005C?
The CL CONTROL LOCK FUNCTION on your LG washer means the control lock is activated to prevent changes to the cycle or operation of the washer. To resolve this, turn off the control lock function in the control panel.
Why does my LG Washer say UE?
The UE error on your LG washer indicates an unbalance error. This can occur if the load is too small, so add additional items to help balance it. It can also happen when heavy items are mixed with lighter ones; try washing items of similar weight. If the load is severely out of balance, manually redistribute the items in the drum.
What to do if my LG WT7005C displays IE error?
The IE error on your LG washer means there's an inlet error. First, check that the water supply faucets are fully open. Also, inspect the water inlet hoses for any kinks, pinches, or crushing, especially behind the washer. Using leak-limiting hoses can also cause this issue, so their use is not recommended. Ensure the end of the drain hose is higher than 29.5 inches above the washer's bottom.
How to fix OE WATER OUTLET ERROR on LG WT7005C?
The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
What to do if my LG WT7005C Washer displays the OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG Washer indicates a drainage issue. This can be due to a kinked, pinched, or clogged drain hose; ensure the hose is free of obstructions. Also, verify that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the hose.
Why does my LG WT7005C have OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG washer means there's an issue with the water outlet. Ensure the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Additionally, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, adjust it to be lower.
How to fix LG WT7005C that is not filling properly?
If your LG washer isn't filling properly, check that the inlet filters on the fill valves are not clogged and that the inlet hoses are not kinked. Ensure both hot and cold water faucets are fully turned on. Close the lid completely, making sure nothing obstructs it. Note that as a High-Efficiency (HE) washer, the water level may not cover the clothes entirely, as the fill level is optimized for wash performance.
Safety messages and their meanings (WARNING, CAUTION).
Precautions for installation and operation to avoid hazards.
Specific caution for installing the product on a firm, level floor.
Cautions regarding appliance use, such as turning off faucets and fabric care.
Warnings and precautions before starting the installation process.
Importance and procedure for leveling the washing machine.
Read safety instructions before operating the appliance.
Guidance on using HE detergents and other cleaning products.
General advice on checking common issues before contacting support.
Table listing error codes and their possible causes and solutions.
Table of common noises and their possible causes and solutions.
Common operational problems and their solutions.
Common performance issues like wrinkling and staining, and their causes.
To Next Page
General
