Why does my LG Washer show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
What to do if my LG Washer shows an IE INLET ERROR?
The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
How to fix OE WATER OUTLET ERROR on LG WT7010CW Washer?
The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
Instructions to read before operating the appliance for safety.
Safety warnings to reduce risks of explosion, fire, death, electric shock, scalding or injury.
Safety precautions for operating the washing machine.
Safety precautions related to appliance maintenance.
Instructions on proper grounding to prevent electric shock.
Important warnings and precautions before starting the installation process.
Step-by-step visual guide for the installation process.
Steps to safely unpack the washer and remove all shipping materials.
Instructions and warnings for connecting the water inlet hoses.
Instructions for connecting the drain hose to a standpipe or laundry tub.
Steps for connecting the drain hose to a standpipe.
Importance and steps for leveling the washing machine for optimal performance.
Detailed instructions on adjusting the leveling feet to ensure the washer is level.
Instructions for connecting the washer to a grounded power outlet.
Initial checks to perform before contacting customer service.
Common error messages and their possible causes and solutions.
Additional error codes and troubleshooting steps.
Solutions for when the washer does not turn on or operate.
Troubleshooting steps for issues with the washer not filling correctly.
To Next Page
General
