EasyManua.ls Logo

LG WT7405CV - User Manual

LG WT7405CV
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
WASHING MACHINE
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH
WT7305C* / WT7405C*
MFL68267085
Rev.02_112522
www.lg.com
Copyright © 2020-2022 LG Electronics Inc. All Rights Reserved.
Scan to see the online manual.

Table of Contents

Questions and Answers

  • J
    Joshua BrandtAug 9, 2025
    Why does my LG WT7405CV Washer show UE UNBALANCE ERROR?
    • S
      Samantha HendersonAug 9, 2025
      The UE UNBALANCE ERROR on your LG washer can occur due to several reasons. It may appear if the load is too small; in this case, add additional items to balance the load. This error can also happen when heavy articles are mixed with lighter items; always try to wash items of similar weight to evenly distribute the load. Finally, the load might be out of balance because articles have become tangled. If this occurs, manually redistribute the load.
  • S
    Steven RayAug 14, 2025
    What to do if my LG WT7405CV Washer shows IE INLET ERROR?
    • J
      johnmartinAug 14, 2025
      If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
  • R
    Richard CohenAug 19, 2025
    Why does my LG Washer show an IE Inlet Error?
    • S
      Samuel WilcoxAug 20, 2025
      The IE Inlet Error on your LG Washer can occur for several reasons. First, ensure that your water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed. Insufficient household water pressure or the use of leak-limiting hoses can also cause this error. Also, make sure that the end of the drain hose is higher than 29.5 inches (75 cm) above the bottom of the washer. If the issue persists, the water inlet filters may be clogged and need cleaning.
  • T
    Tina SpencerAug 25, 2025
    How to fix the UE UNBALANCE ERROR on my LG Washer?
    • L
      Lisa CastilloAug 25, 2025
      The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
  • J
    Joseph MooreAug 29, 2025
    What to do if my LG WT7405CV displays the OE WATER OUTLET ERROR?
    • W
      williamskendraAug 29, 2025
      The OE WATER OUTLET ERROR on your LG Washer indicates a drainage issue. This can be due to a kinked, pinched, or clogged drain hose; ensure the hose is free of obstructions. Also, verify that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the hose.
  • A
    Allen MyersSep 4, 2025
    What to do if my LG Washer shows OE WATER OUTLET ERROR?
    • M
      Mrs. Jessica Smith DVMSep 4, 2025
      If your LG washer shows an OE WATER OUTLET ERROR, it could be due to a kinked, pinched, or clogged drain hose. Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Also, ensure that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the end of the drain hose lower.

LG WT7405CV Specifications

General IconGeneral
BrandLG
ModelWT7405CV
CategoryWasher
LanguageEnglish

Related product manuals