Why does my LG WT7480C Washer show UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer can occur due to several reasons: * The load might be too small. Try adding more items to help balance the load. * Heavy and light items might be mixed. Wash items of similar weight together. * The load may be tangled. Manually redistribute the items if they're tangled, preventing proper rebalancing.
What to do if my LG Washer shows IE INLET ERROR?
If your LG Washer displays an IE INLET ERROR, it could be due to several reasons: 1. Ensure that the water supply faucets are fully open. 2. Check that the water inlet hoses are not kinked, pinched, or crushed. 3. Clean the water inlet filters. 4. Verify adequate water supply pressure by checking other faucets. If low, disconnect the inlet hoses and flush them. If the flow remains low, contact a plumber. 5. Avoid using leak-limiting hoses, as they may falsely trip and prevent filling. 6. Ensure the drain hose end is higher than 29.5 inches (75 cm) above the washer's bottom.
How to fix OE WATER OUTLET ERROR on LG Washer?
To resolve the OE WATER OUTLET ERROR on your LG Washer: * Check the drain hose for any clogs, kinks, or pinches. * Ensure the end of the drain hose is positioned lower than 96 inches (2.4 m) from the bottom of the washer.
General| Capacity | 5.0 cu. ft. |
|---|---|
| Energy Star Certified | Yes |
| Color | White |
| Steam Technology | Yes |
| Wash Cycles | 14 |
| Washer Control Type | Electronic |
| Dimensions (H x W x D) | 44 1/2" x 27" x 28 3/8" |
| Type | Top Load Washer |
To Next Page
