What does LE1 FOREIGN OBJECT ERROR mean on my LG Washer and how to fix it?
The LE1 FOREIGN OBJECT ERROR on your LG washer indicates that foreign objects are caught between the pulsator and the inner tub. Turn the washer off then on again. Press the Spin button without selecting a cycle to drain and spin the load. When the Spin cycle is completed, empty the tub and find and remove any objects caught in the pulsator.
How to fix the UE UNBALANCE ERROR on my LG WT7400C Washer?
To resolve the UE UNBALANCE ERROR on your LG washer, try adding more items to balance the load. Ensure you're washing articles of similar weight for even distribution during spinning. If items are tangled, manually redistribute them to allow the washer to rebalance automatically.
Why does my LG Washer show an IE INLET ERROR?
The IE INLET ERROR on your LG washer can occur for several reasons. First, ensure that the water supply faucets are fully open and that the water inlet hoses are not kinked, pinched, or crushed. Check the water inlet filters for clogs and clean them if necessary. Also, verify that the water supply pressure to the faucet is adequate by checking another faucet in the house. Disconnect the water inlet hoses and flush them out to remove any dirt. Avoid using leak-limiting hoses. Finally, ensure the end of the drain hose is higher than 29.5 inches above the bottom of the washer.
Why will my LG WT7400C Washer not turn on?
If your LG washer won't turn on, first check that the power cord is properly plugged into a grounded outlet. Also, verify that the house fuse hasn't blown, the circuit breaker hasn't tripped, or there isn't a power outage. Reset the circuit breaker or replace the fuse, but do not increase the fuse capacity.
What to do if water in my LG WT7400C Washer does not drain properly?
If the water in your LG washer doesn't drain properly or drains slowly, ensure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Also, make sure the end of the drain hose is lower than 96 inches (2.4 m) above the bottom of the washer.
How to troubleshoot an OE WATER OUTLET ERROR on my LG Washer?
To troubleshoot an OE WATER OUTLET ERROR on your LG washer, first check the drain hose. Make sure it is free of clogs or kinks and is not pinched behind or under the washer. Also, ensure that the end of the drain hose is lower than 96 inches (2.4 m) above the bottom of the washer.
Why is there a musty odor in my LG WT7400C Washer?
A musty or mildewy odor in your LG washer often results from using incorrect or too much detergent. Use only HE (High-Efficiency) detergent in accordance with the manufacturer’s instructions.
What does Ps SUPPLY VOLTAGE ERROR mean on my LG WT7400C and how to fix it?
The Ps SUPPLY VOLTAGE ERROR on your LG washer indicates that the supply voltage is not correct. It is recommended to call the LG service center.
Why is there excessive sudsing in my LG Washer?
Excessive sudsing in your LG washer is often due to using too much detergent or the incorrect type of detergent. HE (High-Efficiency) detergents are formulated specifically for HE washers and contain suds reducing agents. Refer to the Detergent Use section in the manual for recommended detergent quantities.
Why aren't my LG appliance and smartphone connecting to Wi-Fi?
If your LG appliance and smartphone are not connecting to the Wi-Fi network, first ensure that the Wi-Fi password you are using is correct. Try removing the Wi-Fi network connected to your smartphone and reconnect through LG ThinQ. Turn off mobile data on your smartphone and connect using the Wi-Fi network. The wireless network name (SSID) should be a combination of English letters and numbers. Only a 2.4 GHz router frequency is supported.
Emphasizes reading all instructions for safe operation and avoiding hazards.
Details critical warnings for potential hazards to prevent injury or death.
Outlines precautions to avoid minor injury, product, or property damage.
Initial checks and precautions before proceeding with appliance installation.
Guidance on selecting an appropriate installation site and ensuring proper clearance.
Steps to safely remove packaging and prepare the appliance for use.
Instructions for properly connecting water supply hoses to prevent leaks and damage.
Guidance on securely connecting the drain hose for proper water removal and preventing floods.
Key steps and safety checks before operating the appliance.
Initial checks and common problems before contacting customer support for assistance.
Explanation of error codes and their potential causes and solutions.
Troubleshooting common operational problems like water leaking, over-sudsing, or banging noises.
General| Type | Top Load Washer |
|---|---|
| Energy Star Certified | Yes |
| Spin Speed | 1300 RPM |
| Weight | 132.3 lbs |
| Color | White |
| Steam Technology | Yes |
| Smart Technology | Yes |
| Maximum Spin Speed | 1300 RPM |
| SmartThinQ Enabled | Yes |
| Wash Programs List | Normal, Heavy Duty, Delicates, Bedding, Rinse+Spin, Sanitary |
| Wash Options | Extra Rinse, Pre Wash, Delay Wash |
| Water Level Options | Auto |
| Dimensions (H x W x D) | 44.5 x 27 x 28 inches |
To Next Page
