Service Bulletin
Page 6
4) Assemble in reverse order all parts (top cover, inlet valve, PCB, etc.)
5-1) Assemble bleach cap (non-siphon type)
① Hang the lead wire in the bleach cap hook.
③ Assemble the bleach box to the top cover
※ Caution : Please make sure that the bleach box hook
is completely assembled to the top cover.
④ Assemble the bleach cap.
NG
OK
② Assemble the bleach cap.
5-2) Assemble bleach cap (siphon type)
① Hang the lead wire in the bleach box hook.
② Connect the hose and clamp on left side.
Product : Top loader washer
Bulletin # : DFZ201900071-02
Release Date : 2019.05.27
To Next Page
Loading...
Need help?
General
