To Next PageTo Next PageHow to troubleshoot an OE WATER OUTLET ERROR on my LG WT7250C Washer?
To troubleshoot an OE WATER OUTLET ERROR on your LG washer, first check the drain hose. Make sure it is free of clogs or kinks and is not pinched behind or under the washer. Also, ensure that the end of the drain hose is lower than 96 inches (2.4 m) above the bottom of the washer.
What to do if water in my LG WT7250C does not drain properly?
If the water in your LG washer doesn't drain properly or drains slowly, ensure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Also, make sure the end of the drain hose is lower than 96 inches (2.4 m) above the bottom of the washer.
Why will my LG Washer not turn on?
If your LG washer won't turn on, first check that the power cord is properly plugged into a grounded outlet. Also, verify that the house fuse hasn't blown, the circuit breaker hasn't tripped, or there isn't a power outage. Reset the circuit breaker or replace the fuse, but do not increase the fuse capacity.
Why does my LG WT7250C Washer show an IE INLET ERROR?
The IE INLET ERROR on your LG washer can occur for several reasons. First, ensure that the water supply faucets are fully open and that the water inlet hoses are not kinked, pinched, or crushed. Check the water inlet filters for clogs and clean them if necessary. Also, verify that the water supply pressure to the faucet is adequate by checking another faucet in the house. Disconnect the water inlet hoses and flush them out to remove any dirt. Avoid using leak-limiting hoses. Finally, ensure the end of the drain hose is higher than 29.5 inches above the bottom of the washer.
How to fix the UE UNBALANCE ERROR on my LG WT7250C?
To resolve the UE UNBALANCE ERROR on your LG washer, try adding more items to balance the load. Ensure you're washing articles of similar weight for even distribution during spinning. If items are tangled, manually redistribute them to allow the washer to rebalance automatically.
General
