4-1. WIRING DIAGRAM
20
Function Test while operating
Soil Level + Wash Temp. = Laundry Pulse
Soil Level + Fabric Softener = Water Level
Soil Level + Extra Rinse = Supply frequency
Note
Test Mode
• Press Signal and Wash Temp Key
simultaneous after Power on
• Press Start/Pause Button 1time to 9 times
Error Message
• IE – Inlet Error
• OE – Drain Error
• UE – Unbalance Error
• FE – Over Flow Error
• dE – Door Open Error
• PE – Pressure Sensor Error
• AE – Auto Off Error
• E3 – Laundry Amount Sensor Error
4.
SERVICE INFORMATION
To Next Page
Loading...
