LG WTG9532VH - Connecting the Drain Hose; Drain Hose Connection Methods

Connecting the Drain Hose
32
Before connecting the Drain Hose, check your Drain Hose model and choose the correct instructions.
Hose
Guide
0.9~1.2m
Drain Hose
Within 50mm
Put the other end of the drain hose over the standpipe or
wash tub.
2
Fit the end of the drain hose to the outlet of the
drain pump and secure the clamp.
Pump Model
Hose
Guide
0.9~1.2m
Drain Hose
Wi
th
i
n
50
m
m
To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose guide.
The discharge height should be approximately 0.9 ~ 1.2 m from the floor.
NOTE
Before connecting
Ensure that the hose clip is set as indicated here.
Connect the Elbow Hose
Push the elbow hose toward the body of the wash-
ing machine.
Non-Pump Model
Place the Drain Hose
To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step 2.
Clip
1
1
2
3
Hose
Guide
0.9~1.2m
Drain Hose
Within 50mm
Hose
Guide
0.9~1.2m
Drain Hose
W
ith
in
5
0
mm
Hose
Guide
0.9~1.2m
Drain Hose
W
ith
in
5
0
mm
MFL68019741(영)호주향_MFL68019741 14. 12. 10. 오후 1:00 페이지 32