T
Taylor WigginsSep 23, 2025
What to do if my LG WV9-1410B Washer shows a PF error?
- KKeith CampbellSep 23, 2025
If your LG Washer displays a PF POWER FAILURE, it means that the appliance experienced a mains power failure. Restart the cycle.
To Next PageTo Next PageWhat to do if my LG WV9-1410B Washer shows a PF error?
If your LG Washer displays a PF POWER FAILURE, it means that the appliance experienced a mains power failure. Restart the cycle.
Why is my LG WV9-1410B Washer leaking water?
If your LG Washer is leaking, it could be due to several reasons. Check for clogged house drain pipes and unclog them, contacting a plumber if needed. Also, inspect the drain hose for improper installation or clogs; clean and straighten it, and regularly check the drain filter. Ensure the drain pump filter cap is correctly fitted.
What to do if my LG Washer shows a UE error?
If your LG Washer displays a UE UNBALANCE ERROR, it means the load is unbalanced. The clothes may be too wet at the end of the cycle. Rearrange the load to allow proper spinning. Close the door and press Start/Pause button. It may take a few moments before the appliance begins to spin. The door must be locked before spin can be achieved. If the load is too small, add 1 or 2 similar items or smaller articles of clothes to help balance the load. Close the door and press Start/Pause button. It may take a few moments before the appliance begins to spin. The door must be locked before spin can be achieved.
Why is my LG WV9-1410B Washer not filling with water properly?
If your LG Washer is not filling properly, start by checking if the inlet filters on the fill valves are clogged. Also, inspect the inlet hoses for any kinks or clogs. Ensure that both hot and cold water taps are fully turned on. Finally, verify that the hot and cold supply hoses are correctly connected.
Why is my LG WV9-1410B not draining water?
If your LG Washer is not draining water, check if the drain hose is kinked and ensure that the drain hose is not kinked. Also, make sure that the drain hose is no higher than 1.2 m above the bottom of the appliance.
What does FE error mean on LG Washer?
If your LG Washer displays an FE OVERFLOW ERROR, close the water tap and unplug the power plug. Call for service.
Why is the cycle end delayed on my LG WV9-1410B?
If the cycle end is delayed on your LG Washer, it is normal because unbalance is detected or suds removing programme is on. The time remaining shown on the display is only an estimated duration. Actual time may vary.
Why is my LG Washer not removing stains?
If you're experiencing poor stain removal with your LG Washer, it may be because articles that have been previously washed may have stains which have been set. These stains may be difficult to remove and may require hand washing or pre-treating to aid in stain removal.
Why are my clothes wrinkling in my LG WV9-1410B Washer?
If your clothes are wrinkling after washing in your LG Washer, ensure you remove items from the appliance as soon as the programme is complete. Avoid overloading the appliance; while it can be fully loaded, the drum should not be tightly packed. Check the supply hose connections, as reversed hot and cold water supply hoses can cause wrinkles. Finally, adjust the spin speed to suit the garment type.
Why is my LG WV9-1410B making a rattling noise?
If your LG Washer is making a rattling or clanking noise, there might be foreign objects like keys, coins, or safety pins in the drum. Stop the appliance and check the drum for such objects. If the noise continues after restarting, call for service.
General| Type | Front Load |
|---|---|
| Capacity | 9 kg |
| Energy Rating | A+++ |
| Spin Speed | 1400 RPM |
| Weight | 70 kg |
| Color | White |
| Washing Capacity | 9 kg |
| Energy Efficiency Class | A+++ |
| Noise Level Spinning | 74 dB |
| Steam Function | Yes |
| Inverter Direct Drive | Yes |
| Inverter Motor | Yes |
| Programs | 14 |
| Noise Level (Wash/Spin) | 74 dB |
| Smart Features | Wi-Fi |
Guides on connecting the water supply and drain hoses properly.
Advice on sorting clothes, care labels, loading, and using detergents/softeners.
Identifies control panel features, display, programmes, and options.
Introduction to the LG ThinQ app for smartphone communication.
Instructions for periodic cleaning like Tub Clean and handling emergency water evacuation.
Lists common error codes, their causes, and solutions.
Addresses problems like water leaks, appliance not operating, filling/draining issues.
