36
Using the system
3-1. Running on Battery
Notebook PC runs on AC power or battery. This section describes the procedure that the user should take initially for a new
system. The provided AC adapter can be used on both 100V and 240V.
Charge the new battery with the AC adapter before use.
※
Refer to
[
Charging Battery with AC Adapter
]
in User's Guide.
1.
Turn the machine over to see the battery pack chamber and equip the pack.
-
Insert the battery pack into the chamber as shown in the following figure and push it in the direction of the arrow until you hear a clicking
sound.
2.
Open the machine and turn the power on.
3.
Check the battery state.
To Next Page
Loading...
