System Setup
89
4.
When the following message appears, press the [Enter] key.
5.
To save changes in System Setup, press the [F10] key.
6.
When the following message appears, select [Yes] and press the [Enter] key. The notebook PC will restart.
▶
Set User Password
The Set User Password is lower in priority than the Set Supervisor Password, and so the user can use the Set User Password
only after setting the Set Supervisor Password.
1.
After opening the system setup screen, use the arrow keys to move to Security.
■ With the Supervisor Password, the user will be authorized to set all items in the CMOS setup
menu and to do the Power on Boot. In case other people also use the notebook PC, it is
recommended to set the User Password.
To Next Page
Loading...
