96
System Setup
6-4. Restore the Default Settings
If you have changed the system setup by mistake, you can restore the default settings.
1.
After opening the system setup screen, use the arrow keys to move to Exit.
2.
Use the arrow keys to select Load Setup Defaults, and press [Enter].
3.
When the following message appears, select [Yes] and press the [Enter] key. The settings will be reset to their original
defaults.
4.
To save the changes in system setup, press
F10
.
5.
When the following message appears, select [Yes] and press the [Enter] key. The notebook PC will restart.
■ You may also use [F9] to make Load Optimal Defaults available at once.
To Next Page
Loading...
