Connecting Peripherals
81
▶
Smart Link Folder Sharing Window
When the two PCs are properly connected with
Smart Link
, the following
Smart Link
Folder Sharing window appears.
※
The
Smart Link
Folder Sharing window appears automatically. If there is no input for approximately 5 seconds
after the
Smart Link
Folder Sharing window appears, it closes automatically. If you want to reopen the
Smart
Link
Folder Sharing window, double-click
.
1.
List: You can set the read
/
write rights in the left panel. The right panel displays the path of the shared folder.
※
When the checkbox is deselected, only the read right is granted. When selected, both the read/write rights are granted.
2.
The Add button: You can add a folder to share.
3.
The Delete button: You can delete a shared folder from the list.
4.
Share ODD: This option is available when an ODD is installed. You can share the ODD by selecting the option.
5.
The OK button: Saves the settings and closes the
Smart Link
Folder Sharing window.
6.
The Cancel button: Discards the settings and closes the
Smart Link
Folder Sharing window.
▶
Sharing a Folder Using Smart Link
1.
Click Add.
※
The available local folders are displayed in a window.
2.
Select the local folder to share and click OK.
3.
Specify the read or read/write right for the selected folder and click OK.
※
If you want to share an ODD, select the Share ODD checkbox.
4.
Open the window for the remote computer. Shared local folders and ODD are displayed in the window.
To Next Page
Loading...
