88
System Setup
6-2. Setting the Password
This process is to set a password so that other people cannot use the notebook PC or change the settings.
The user can set a password while booting the system or setting up the system.
▶
Set Supervisor Password
The password prevents unauthorized people from accessing the notebook PC. By default, no password.is set for the machine.
In case an unauthorized person changes the CMOS setup while the notebook PC is on, a password will be set and the user
will be denied from the access to the system.
1.
After opening the system setup screen, use the arrow keys to move to Security.
2.
When the following screen appears, select Set Supervisor Password with the arrow keys and press [Enter].
3.
When the following message appears, input the password and press [Enter]. Password would be maximum 8 characters
combined with characters (A~Z) and numbers (0~9).
■
Without the registered password, if any, access to the system will be denied. Write down and keep the
password in a safe place.
To Next Page
Loading...
