LGMG SR1018D - Page 70

Elevating Work Platform Operation Manual
63
indicating that the idling has been
selected. The indicator is off, indicating
that the intermediate and low idling has
been selected.
7
Red emergency shutdown button
Push the red emergency shutdown button
inward to Off position to stop all functions
and shut down the engine. Pull the red
emergency shutdown button out to On
position to operate the machine.
8
Enabling switch
Press the enabling switch to start up the
function.
9
Thumb rocker switch for steering function
Press the enable switch and press the left
side of the thumb rocker, then the
machine will turn to the left.
Press the enable switch and press the
right side of the thumb rocker, then the
machine will turn to the right.
10
Proportional control handle of driving/lifting
/Outrigger function
Press the driving function button, press
the enable switch and move the control
handle in the direction indicated by the
blue arrow or yellow arrow on control
panel, and then the machine will move in
the direction indicated by the blue arrow
or yellow arrow.
Press the lifting function button, press the
enable switch and move the control
handle forward, and then the machine will
lift; move the control handle backward,
and then the machine will lower.
Press and hold the outrigger function
button, press the enable switch and move
the control handle in the direction
indicated by the yellow arrow or blue
arrow on control panel, and then the
outrigger will extend or retract.
11
Enabling button of lift function with indicator
Press this button to activate the lift
function.
12
Enabling button of drive function with indicator
Press this button to activate the walking
function.
13
Hydraulic generator(If equipped)
14
Glow plug button
Press this button to activate the glow
plug.
15
Startup button of engine
Press this button to start up the engine.