enable switch and move the control handle. The
outrigger will extend and retract depending
upon the direction the button was pushed. After
the outrigger is firmly set, the indicator on the
button will be on.
6) Automatic Leveling
When the machine is tilted, it is necessary to
use outriggers to level the vehicle. The control
system allows automatic leveling using the
outriggers. Turn the key switch to the upper
control mode, start the engine, press and hold
the automatic leveling button, press the enable
switch and move the control handle in the
direction of yellow arrow or blue arrow, the
outrigger will extend or retract. After leveling,
the four lamps on outrigger button will be on;
push the switch, there will be an alarm. At this
moment, the outrigger cannot extend, indicating
that the vehicle is in leveling mode.
To Next Page
Loading...
