Liberty Pumps 287 User Manual (English)

Questions and Answers:

B
Brian PotterAug 8, 2025
Why Liberty Pumps 287 Water Pump won't run?
- V
  Victor LoveAug 8, 2025
  If your Liberty Pumps Water Pump isn't running, there are several potential causes. It could be due to a blown fuse or power interruption, or improper voltage. Ensure the unit is securely plugged in and have an electrician inspect the wiring. The switch may be obstructed, preventing it from turning on, so ensure the pump or switch has enough clearance. Also, the liquid level might be insufficient to activate the switch. Finally, the switch itself could be defective and need replacement.
M
Madison SmithAug 15, 2025
What to do if Liberty Pumps Water Pump runs but doesn't pump?
- A
  Ashley GarciaAug 15, 2025
  If your Liberty Pumps Water Pump runs or hums but isn't pumping water, consider these possibilities. The discharge line might be blocked; check for any obstructions, including ice if the line runs through cold areas. The check valve could be stuck or installed backward; remove and inspect it. Ensure that any gate or ball valves are open. The pump's total lift capability might be exceeded; try routing the piping to a lower level, or consult the factory about a larger pump. Lastly, the impeller could be jammed or the volute casing plugged; remove the pump, detach the base, clean around the impeller, and reinstall.
A
Ashley PierceAug 20, 2025
What to do if Liberty Pumps 287 Water Pump will not turn off?
- K
  Kyle PetersenAug 20, 2025
  If your Liberty Pumps Water Pump won't turn off, it could be caused by a couple of things. The switch might be obstructed, preventing it from moving to the 'turn off' position. Ensure the pump or switch has adequate clearance for free operation. Alternatively, the switch itself could be defective and require replacement.
S
Sarah SmithAug 27, 2025
How to fix a noisy Liberty Pumps Water Pump?
- M
  Mr. Stephen WilliamsAug 27, 2025
  A noisy Liberty Pumps Water Pump could be due to several reasons. There might be foreign objects in the impeller cavity; remove the pump, detach the base, clean the impeller area, and reassemble. A broken impeller could also be the culprit, consult the factory for information regarding replacement of impeller. Worn bearings can cause noise; return the pump to the factory or authorized repair station for repair. Finally, rigid piping attachments to the building can transmit noise; replace part of the discharge line with a rubber hose or connector.
K
Kari JonesSep 1, 2025
Why does Liberty Pumps Water Pump run periodically?
- J
  Jessica WeberSep 1, 2025
  If your Liberty Pumps Water Pump runs periodically even when fixtures aren't in use, it could be due to a check valve issue. The check valve might be missing, stuck open, or leaking; remove and inspect it for proper function and installation. Another possibility is leaking fixtures; repair any leaks to stop the pump from cycling unnecessarily.