To Next PageTo Next Page
Need help?Do you have a question about the Liberty Pumps COMMERCIAL Series and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Series | COMMERCIAL |
| Voltage | 115V |
| Discharge Size | 2", 3" |
| Construction | Cast Iron |
| Cord Length | 10 feet |
| Maximum Flow Rate | Up to 180 GPM |
| Motor Type | Oil-Filled |
| Impeller Material | Cast Iron |
| Seal Type | Mechanical Seal |
| Switch Type | Automatic or Manual |
| Warranty | 3 Years |
Explains safety alert symbols, electrical, fire, and general hazard warnings.
Covers pump sizing limits, model specs, and inspection/storage guidelines.
Details requirements and considerations for control panels used with the pumps.
Covers overload protection, power cord specs, and general wiring safety.
Steps for preparing the pump basin and checking impeller free movement.
Covers float placement, electrical connections, discharge, and basin venting.
Crucial steps to verify and correct 3-phase motor rotation direction.
Guide for system startup and recommended monthly/quarterly maintenance checks.
A matrix to diagnose and resolve common pump operational issues and their causes.
Outlines the terms, conditions, and limitations of the product warranty.
