To Next PageTo Next Page
Need help?Do you have a question about the Liberty Pumps LCU Series and is the answer not in the manual?
General| Model | LCU Series |
|---|---|
| Pump Type | Submersible |
| Horsepower | 1/3 HP |
| Voltage | 115V |
| Phase | 1 |
| Discharge Size | 1 1/2" |
| Seal Type | Mechanical |
| Cord Length | 10 ft |
Warns about accidental contact with live parts, fluid, or water, advising disconnection before servicing.
Warns about hazards that can cause fire, such as using extension cords or flammable fluids.
Details selecting a location, connecting the drain pan, and discharge tubing specifications.
Explains connecting safety switch leads to low voltage circuits for overflow prevention or alarms.
Describes how to remove and rotate the tank cover for optimal check valve placement.
Covers connecting the unit to a constant power source, including wire connections and junction box requirements.
Outlines how to test the unit by adding water to ensure proper discharge and check connections.
Lists common causes and solutions for a pump that fails to start or make noise, including power and float issues.
Addresses issues where the pump operates but does not move water, checking for blockages, kinks, or improper check valve function.
Details troubleshooting steps for a pump that runs continuously, focusing on float obstruction or switch defects.
Explains causes for reduced water delivery, such as high lift, inlet/discharge blockages, or check valve issues.
Guides users on diagnosing circuit breaker or fuse issues, including breaker size, dedicated circuits, and wiring.
Outlines the three-year limited warranty, coverage, limitations, and conditions for Liberty Pumps wholesale products.
