To Next PageTo Next Page
Need help?Do you have a question about the Liberty Pumps Omnivore LSG202M and is the answer not in the manual?
General| Model | LSG202M |
|---|---|
| Horsepower | 2 |
| Voltage | 115/230 |
| Construction Material | Cast Iron |
| Housing Material | Cast Iron |
| Float Switch Included | Yes |
| Thermal Overload Protection | Yes |
| Warranty | 3 Years |
| Discharge Size | 2 |
| Motor Type | Oil-filled |
| Maximum Solids Handling | 2 |
| Phase | Single-Phase |
Guidance on using the Liberty pump manual for correct installation, operation, and maintenance.
Details on the grinder pump's design, including rotating parts, motor insulation, seals, and cutter mechanism.
Instructions for inspecting the pump upon delivery for damage and ensuring the cutter is free.
Guidelines for storing Liberty pumps before installation, emphasizing a clean, dry, temperature-stable environment.
Steps for installing grinder pumps, including tank venting, depth, and guide rail mounting.
How to connect and operate the pump using a piggyback switch and a 6-20R receptacle.
Guidance on direct wiring automatic pumps, including voltage checks and cord plug end modifications.
Instructions for operating control panels, advising to consult the manufacturer's wiring diagram.
Details on external capacitors and start relays for specific single-phase pump models.
Pre-energization checks including connections, hardware security, and insulation resistance tests.
Explanation of how float switches control pump cycles and alarm systems.
Confirms the pump is ready for operation after installation and advises on applying rated power.
Highlights the importance of preventive maintenance checks for long-lasting pump service.
Specifies the type of oil for pump lubrication and its capacity, offering alternatives if needed.
