To Next PageTo Next Page
Need help?Do you have a question about the Liberty Pumps 406 and is the answer not in the manual?
General| Model | 406 |
|---|---|
| Category | Water Pump |
| Type | Submersible Sump Pump |
| Horsepower | 1/3 HP |
| Voltage | 115V |
| Discharge Size | 1-1/2" NPT |
| Maximum Head | 25 ft |
| Cord Length | 10 ft |
| Switch Type | Vertical Float |
| Housing Material | Cast Iron |
| Phase | Single Phase |
| Impeller Material | Thermoplastic |
| Seal Material | Carbon/Ceramic |
Identifies the specific drain pump model covered by the manual.
Lists the key attributes and design benefits of the Model 406 pump.
General safety alerts and warnings for operation and installation.
Details precautions to prevent serious injury or death from electric shock.
Warns about fire hazards, including extension cord and liquid risks.
Guidance on planning the physical arrangement and power source location.
Specifications and recommendations for piping materials and installation.
Rules and restrictions regarding proper disposal of discharged fluid.
Specific considerations for connecting bathtubs or showers to the pump.
Details on how discharge piping should be routed to prevent siphoning.
Advice on protecting the unit and piping from freezing conditions.
Instructions for connecting fixtures to the top inlet port.
Guidance on using the side inlets and their check valve orientation.
Recommendations for routine checks and upkeep of the pump system.
Guidance on identifying and resolving common pump operational issues.
