Liebert IntelliSlot Installation Manual

Network Settings
22
Web Interface
To access SNMPv1/v2c Communities settings through the Web interface:
• Click on the Configure tab, then Access or V1 Access (under Management Protocol) in the
left panel and finally Edit in the right panel. After making changes, click Save.
NOTE
Avoid the following setting—it permits access by any host and may pose a security risk:
• Network Name = 0.0.0.0
• Access = write
•Community = public
Click on Edit
V1 Access
Configure
tab
Configure up to 20 devices for read/write access

Liebert IntelliSlot Specifications

General

Form Factor	Plug-in module
Connectivity Technology	Wired
Model	Liebert IntelliSlot
Device Type	Network Card
Compatibility	Liebert UPS systems
Network Protocols	TCP/IP, SNMP, HTTP, HTTPS
Data Link Protocol	Ethernet
Remote Management Protocol	SNMP
Management	Web-based, SNMP
Security	Password protection, HTTPS
Power Supply	Powered by UPS
Features	Event logging
Compliant Standards	FCC, CE