Maintenance
140
PROGRAMMABLE RELAY BOARD SETTINGS RECORD
The optional Programmable Relay Board (PRB) has eight channels to report events to an external
device. Up to ten (10) events can be programmed to each channel. See 6.1 - Programmable Relay
Board for more information on the PRB.
If your Liebert STS2 has the PRB option installed, list the settings below for future reference. If con-
trol power is lost in the Liebert STS2, the settings are not saved.
Channel 1:
Channel 2:
Channel 3:
Channel 4:
Channel 5:
Channel 6:
Channel 7:
To Next Page
Loading...