Liebert Static Transfer Switch - Figure 38 Installation Drawing, Seismic Floor Stand 400-600 A

Installation Drawings
51
Figure 38 Installation drawing, seismic floor stand 400-600A
A
2 PLACES
DETAIL A
REAR UPPER STS2 BRACKET REAR LOWER STS2 BRACKET
UPPER REAR BRACKET TABS TO SLIDE INTO LOWER REAR BRACKET SLOTS
(2 PLACES) CAP SCREW M10-1.5X30MM SPLIT LOCK WASHER M10 FLAT WASHER M10
(2 PLACES) CAP SCREW M12-1.75X40MM SPLIT LOCK WASHER M12 FLAT WASHER M12 LOWER FRONT BRACKET
NOTE:
SEE DWGS PS216000, PS216001, AND PS216003
FOR DETAILS.
FIG. 2
REAR RIGHT ISOMETRIC VIEW
FIG. 3
RIGHT SIDE VIEW
FIG. 1
FRONT LEFT ISOMETRIC VIEW
PS216002 Rev. 0