Liebert Static Transfer Switch - Figure 42 Installation Drawing, Seismic Floor Stand 800-1000 A

Installation Drawings
55
Figure 42 Installation drawing, seismic floor stand 800-1000A
RIGHT REAR UPPER STS2 BRACKET RIGHT REAR LOWER STS2 BRACKET UPPER REAR BRACKET TABS TO SLIDE INTO LOWER REAR BRACKET SLOTS
(2 PLACES) CAP SCREW M10-1.5X30MM SPLIT LOCK WASHER M10 FLAT WASHER M10
(2 PLACES) CAP SCREW M12-1.75X40MM SPLIT LOCK WASHER M12 FLAT WASHER M12
LOWER FRONT BRACKET
NOTE:
SEE DWGS PS217000, PS217002, AND PS217003
FOR DETAILS.
FIG. 2
REAR RIGHT ISOMETRIC VIEW
FIG. 3
RIGHT SIDE VIEW
FIG. 1
FRONT RIGHT ISOMETRIC VIEW
A
DETAIL A
4 PLACES
PS217002 Rev. 0