Liebert UPS System - 5.4 Prompt window

Chapter 5 Operation of Display Panel
57
After escaping the modification state, the date displayed by the UPS basic
information window has become a new date. Then use F2 (move left) and F3
(move right) keys to move the cursor to the location of “second”, as shown in Fig. 5-
27.
2001-11-08
UL33-0400L
12:50:30
Inv. On Units 2/4 ID: 1
Input Breaker Closed
11£ -08 12:09
UPS in Battery Mode
Battery low
11£ -08 12:09
11£ -08 12:28
11£ -08 12:28
11£ -08 12:50
Records
Out
System
Local
Settings
Byp. Breaker Closed
Mains Volt. Abnormal
Battery
Chinese
Chinese
English
Com. Adress Set
1
1
Date & Time Set
2001£ -11£ -09 12:50:30
Language
c
ok
Fig. 5-27 Setup the date 4
Pressing F4 to let the “second” to be able to be modified, as shown in Fig. 5-28.
2001-11-08
UL33-0400L
12:50:30
Inv. On Units 2/4 ID: 1
Input Breaker Closed
11£ -08 12:09
UPS in Battery Mode
Battery low
11£ -08 12:09
11£ -08 12:28
11£ -08 12:28
11£ -08 12:50
Records
Out
System
Local
Settings
Byp. Breaker Closed
Mains Volt. Abnormal
Battery
Chinese
Chinese
English
Com. Adress Set
1
1
Date & Time Set
2001£ -11£ -09 12:50:30
Language
ok
C
Fig. 5-28 Setup the date 5
Pressing F3(down) to change the “second” to 20, press F4(Enter) to confirm and
exit, as shown in Fig. 5-29. If you do not want to modify the “second”, pressing
F1(ESC) to escape.