EasyManua.ls Logo

Lienuis OL20-D068C - Timer, Fan, and Humidity Settings; Child Lock Functionality

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Sleep mode:In sleep mode , the target humidity is 60%, and after no operation for 10 seconds,
except sleeping mode indicator light , power indicator light and child lock indicator light will dark,
other the indicator lights and display screen will be off .
When room humidity 57%RHthe compressor & fan will stop working .
When room humidity 63%RHthe fan&compressor will start working .
In sleeping mode, when the water tank is full , the machine will not alarm , but the water tank
full indicator light will be on (red color) to remind that the water tank is full and you need to
empty the water tank.
TIMER
FAN
HUM
CHILD-LOCK
Press the timing key to set timing / check timing / cancel timing
A.In the non timing state: press the timing key to enter the timing setting state. The digital screen
flashes to display the timing time. During the flashing period of the digital screen, press the
adjustment key to adjust the timing time (0 ~ 24h).
B.In the timing state: press the timing key, and the digital screen flashes to display the remaining
timing time. Press the timing key again during the flashing period of the digital screen to
cancel the timing.
Press this button to switch the fan speed between high and low fan speed cycle, and the
corresponding indicator light will be on .
The fan speed can be adjusted only in Auto mode.
Press this button to set humidity and timing time;
To humidity adjusting , press one time to add 5% humidity value, the humidity adjusting follow the
order as below : 30% - 35% - 40% - 45% - 50% - 55% - 60% - 65% - 70% - 75% - 80% - 30% cycle.
To timing,press one time to add 1 hours timing value, the timing follow the order as below:
00-01-02-03-04-05-06-07-08-09-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-00 cycle.
Press and hold this button for 3 seconds to open the child lock function ,the indicator light will
be on and you can not operate other buttons except this one . Press and hold this button for 3
econds again to close the child-lock function ,the indicator light will be off.