6 VeloCycle User Manual Lifepro Endurance Training Collection 7
Endurance Training Collection 7
GET STARTED
FIRST STEPS
1. Remove your VeloCycle from the shipping box and remove all of the
packaging from the bike frame and parts, and open the tool/accessory
bag.
NOTE: All of the hardware (screws, washers, and nuts) comes pre-fitted to
the associated part or to the corresponding area of the bike frame. Do not
remove pre-fitted hardware until instructed to do so.
2. Read carefully through this user manual and all safety instructions
before assembling and using the VeloCycle.
3. Go to velocycle.lifeprofitness.com and register your product within
14 days of purchase to activate your lifetime warranty.
4. Complete the steps in the 30MINUTE ASSEMBLY GUIDE on page 10
to assemble your VeloCycle.
CAUTION: Take care when lifting or moving the bike. Always use proper
lifting techniques and use assistance if needed.
NOTE: Assemble the bike on a flat surface at least 6-by-6-foot, free of
obstructions.
CUSTOMER SUPPORT
If you have any questions about assembling or using your
VeloCycle, we’re here to help. Call or email us and an experienced
customer support representative will be happy to assist you:
(732) 456-6063 or support@lifeprofitness.com.
VELOCYCLE
EXERCISE BIKE
ENDURANCE TRAINING
GET ACQUAINTED
Multi-tool
(40)
4mm Hex
Key (41)
6mm Hex
Key (42)
Locking
Pin (3)
AA
Batteries (32)
Water Bottle
Holder (37)
User
Manual (39)
Left Pedal
(36 L)
Right Pedal
(36 R)
Front Stabilizer
with Wheels (6)
Rear
Stabilizer (7)
Folded Bike
Frame (1)
Rear
Handlebars (24)
Console/Handlebar
Frame (29/30)
Console
Post (25)
Seat Post (13) Seat and Backrest
Frame (17)
Backrest (16)Seat (10)
To Next Page
Loading...
